Basic Info.
After-sales Service
1 Year Warranty
Certification
RoHS, ISO 9001:2000, ISO 9001:2008
Suitable for
Recycled Material, Wood, Paper
Paper Thickness
Normal Specification Paper
Economic Speed
80-120m/Min
Transport Package
Plastic
Product Description
Main technical parameter and requirements Model: WJ120-1400 - type II five layer corrugated board production line:- Maximum production width of corrugated board:1400mm
- Design speed120m/min
- Economic speed80-120m/min
Note: line speed test paper should meet the following requirements: (equipment surface temperature is not lower than 172 ºC or above)*The original paper grade shall not be less than the amount of water in grade B *The water content of the original paper is about 11% ± 2%*Surface paper: 100-250g/m2 *core paper:100-250g/m2 *Tile paper: 100-200g/m2 4,Corrugated combination: A, C, B, E (or selected by the customer)5,Steam requirement: *Steam in 2500-3000 kg/Hr *Top pressure: 1.2Mpa * pressure: 0.8-1.1Mpa 6,Power supply:380V 50Hz Three phase four wire system- The total power about 120KW The practical power about 60KW(full speed)
8,Equipment cover an area of about 46m×10m×5m(The specific length is based on the foundation of foundation)- Paper direction: drive left or right set according to the user factory
10,Equipment applicability, usable A, B, C grade domestic original paper or imported original paper.Configuration instructions for single machine1,ZJ-V5B hydraulic shaftless mill roll stand ,Structural features:★Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.★Brake adjustable adopts multipoint braking system.★Each paper rack is equipped with two paper carts that can be served simultaneously from both sides. ,Technical parameter:- Paper clip range : 1400mm
- Folder diameter maximum : 1500mm minimum : 350mm
3.Main shaft diameter of paper holder:¢240mm 4,Gas source work pressure(Mpa):0.4---0.8Mpa , Hydraulic system parameters :- Work pressure(Mpa):16---18Mpa
- Lifting hydraulic cylinder:¢100×440mm
- Clamping hydraulic cylinder:¢63×1300m
- Hydraulic station motor power:3KW --380V -- 50Hz
- Solenoid valve voltage:220V 50 Hz
2,paper trolley,track ,Structural features:★Push the roller in place.★Track whole buried, The main frame of the 14th channel with ¢ 20mm cold drawn round welding,the track length 6000mm.,14¢20mm,6000mm.★Each paper with two stage paper trolley,and the paper from the two sides at the same time.3, RG-2-600 triple preheater RG-2-600,Structural features:★The preheating roller is designed with butterfly head, which conforms to the first class national standard of pressure vessel and has the certificate of pressure vessel.★The roll surface after precision grinding, fine grinding and hard chromium plating processing,surface friction is small and durable.★Electric adjustment wrap angle , wrap angle can be rotated within 360 °to adjust the paper heat area . ★The double-stage reducer is used to adjust the angle of the package and has the function of self-locking. ,Technical parameter:★Effective width:1400mm ★Diameter of the preheat roller:¢600mm ★Diameter of the angle:¢85mm×2 ★Steam temperature:150-200 ºC ★Steam pressure:0.8-1.3Mpa ★Motor power:250W short(S2)work system 4,SF-290s single surface adsorption machine,Structural features:★The use of suction hood structure, with high - pressure strong fan. The air suction is equipped with sound attenuation device, and the air source and electrical control are concentrated in the same operating cabinet. The distance from the main machine is not less than 1.5m.★The operating side is fully closed and covered.Machine base and wallboard cast iron structure, wallboard thickness of 130mm. Universal joint drive.★The corrugated roller material is made of 48 crmo alloy steel, after tempering, medium frequency quenching, surface polishing, corrugated roller diameter ¢293 mm, surface hardness above HRC60 degrees (optional, tungsten carbide roll and surface hardness HV1200). Key parts of the tile roller, pressure roller bearings using wafangdian high temperature bearings.★The pressure roller ¢320 mm, surface grinding and chrome plated treatment; The cylinder is controlled to move up and down, and the material is medium carbon steel no.45, tempering and tempering treatment (with buffer device).★The pneumatic control to glue back glue, glue spreader with 25 ¢215 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing.★Raw materials of corrugated roller and pressure roller are provided by zhongyuan special steel co., LTD. The corrugated roller has a top middle height of 0.15mm on one side and a middle height of 0.075mm on the other side. Add limit device.★The diameter of the core paper preheating roll (top) is 400mm, and the diameter of the lint preheating roller (bottom) is 600mm.,Technical parameter:1,Working width:1400mm 2,Operation direction: left or right (according to the customer's workshop)3,the design speed: 120 m/min 4,temperature range: 200-260 ºC 5, corrugated (UV or UVV) ,Roller diameter parameter:- corrugated roller diameter:¢293 mm
- pressure roller, ¢320 mm
- glue roller diameter: ¢215 mm The diameter of the core paper preheating roll (top) is 400mm, and the diameter of the lint preheating roller (bottom) is 600mm.
,Powered motor parameters- Main drive motor: 11KW
2,suction motor :11KW 5,ZDF conveyor bridge ,Structural features:★This part is the main beam of the 20th channel, 16-beam, angle iron 63, column, etc. are connected.★Both sides of the security fence, ladder , high-strength save people the word pedals, ensure the safety of personnel and easy to operate.★Pull the paper shaft surface tension axis, feeding shaft by grinding hard chrome plated.★Vacuum tension control, 5-inch suction tube, plus regulating valves, air flow can be infinitely adjustable.★Dual front bezel correction guide column positioning, screw driver, fast and accurate positioning, walking steadily.,Roller diameter parameter:★Paper roll and a tension roller diameter:¢130mm ★Conveying roller diameter:¢180mm ★Active tension roller diameter:¢85mm ★Diameter of over paper rollers and guide rollers:¢110mm ★Paper towing shaft diameter:¢110mm ,Powered motor parameters★Corrugated single paper lift motor:2.2KW ★The bridge adsorption motor:2.2KW ★Wide motor tune cardboard:250W 6,GM-20 Glue machine ,Structural features:★After the surface of cots is adjusted and tempered, the inner hole is processed, the dynamic balance surface is polished and there are 32 lines of concave net pattern, the glue is uniform and the amount of glue consumption is less.★The rotation of the cots is controlled by the variable frequency motor and frequency conversion, and the frequency control ensures that the linear speed of the cots is synchronized with the two sides, and it can operate independently.★Coating electric adjustment glue amount of digital display. Automatic circulation of glue, can effectively control the amount of glue, avoid glue precipitation, ensure good glue and save glue.★All roller surfaces are ground after hard chromium plating.★ The speed signal of double-sided machine is measured to realize synchronous operation with it. The rubber coating machine is displayed with man-machine interface, which can be used for data setting and easy to operate.★Electrical design, construction production process, follow the national standards, low failure rate, easy maintenance.,Technical parameter:★Effective width:1400mm ★Operation direction:left or right(determined in accordance with customer plant)★Design speed:150m/min ★Gas supply system:0.4-0.6Mpa ★Preheat cylinder temperature range:150-200ºC ★Steam pressure:0.8-1.2Mpa ,Roller diameter parameter:★Glue roller diameter:¢269mm ★Doctor roller diameter:¢142mm ★Over the paper roll diameter:¢110mm ,Powered motor parameters:★Glue roller initiative frequency motor:3KW ★Sizing Reducer::250W ★Pressure roller clearance adjustment motor: 250W ★Glue pump motor:2.2KW 7,SM-12type double facer ,Structural features:★Heating plate surface by grinding treatment, hot plate width 600mm, a total of 12 heating plate and cooling 4 m.Heating plate with a container board production, in line with national standards for a class pressure vessel, with pressure vessel certificate and inspection certificate.★Hot plate with intensive gravitational roll structure. Roll adopt pneumatic lifting.★Heating plate heat transfer pipe temperature control sub-four-segment, with a temperature display. ★Double cylinder S type cotton belt tensioning device is used for upper cotton belt.★The lower band adopts S-shape manual deflect-correcting tensioning mechanism, the structure is simple and practical, and the lower belt is a set of manual fine adjustment.★Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output.★Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.★Hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam.,Technical parameter:★Temperature requirement:160-200ºC ★Steam pressure:0.8-1.3MPa ★Air source pressure:0.6-0.9MPa ★Cooling stereotypes length:4m ★Heating plate quantity:12 pieces ★Hydraulic system pressure:6---8MPa ,Roller diameter parameter:★Upper drive rubber roller diameter:¢475mm ★Lower drive rubber roller diameter :¢350mm ★Former follower with roller diameter:¢215mm ★Back setting belt driven roller diameter:¢176mm ★Platen roller:¢70mm ★Setting roller diameter:¢86mm ★Upper belt tension roller diameter:¢155mm ★Upper roll diameter with detuning:¢124mm ★Entrusted with the roll diameter lower belt:¢130mm Note: All the roller surface after grinding are hard chrome plated.,Powered motor parameters★Main drive motor power:22Kw 8,ZQS Thin knife slitting ★structural feature:★Overcome the conventional type of pole, cutting pressure lines appear when collapsed cardboard cut phenomenon, cutting board smooth, quality has improved significantly.★the whole machine can remove left and right,cycloid reducer to adjust.★Cutter and easy to adjust the pressure line, the error ± 0.5mm, automatic sharpening device, you can achieve timing Brothers, with intermittent Brothers and other features.★the machine adopt five knives eight lines,the blade is made of tungsten alloy steel, the using life is not less than 3 million running meters. regular technical parameters:1,effective width:1400mm 2,The maximum mechanical speed:120m/min3,Mechanical configuration: 5knives 8lines 4,The minimum width of the cutter:135mm The maximum width of the cutter:1850mmPower motors and electrical parameters:1,Line cutter line motor:0.4Kw 2,Knife wheel drive motor:5.5Kw Mainly purchased parts, raw materials and origin: 9,NC-120 NC cutter helical knives ,Structural features:★It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management.★Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy.★Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.★Around feed rollers are used the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.★This type of brake is energy storage type (non-energy brake), so in the process of production, the average power consumption is 1 / 3 of that of the ordinary NC cutting machine, saving more than70% of electricity and achieving the goal of saving money.★Exact and adjustable no gap gear to ensure precise blade engagement, running balance.★Independent oil pump and filter are used to distribute two sets of copper pipes in each gear position to feed oil, lubricate and cool.★Knife roller: fine quality forged steel material, the balanced, with good stability.,Technical parameter:★Effective width:1400mm ★Operation direction:left or right(determined in accordance with customer plant)★Design speed: 120 m / min ★Mechanical configuration: computer helical cutter crosscutting ★Minimum cutting length:500mm ★Maximum cutting length:9999mm ★Cutter accuracy: Uniform for ± 1mm, non-uniform to ± 2mm★Equipment size: Lmx4.2 Wmx1.2 Hmx1.4 ★Single machine weight: maximum 3500kg ,Roller diameter parameter:★Cross on the knife shaft center distance:¢216mm ★Before the lower conveying roller diameter ¢156mm ★After the lower conveying roller diameter:¢156mm ★Roll diameter: 160mm. ★Output solar wheel diameter: 160mm Note: all roller shafts after grinding, the surface of hard chromium plating (except upper, lower tool shaft).,Powered motor parameters:★main drive motor power:12.5Kw Full AC synchronous servo★Before feeding motor power:3Kw(Frequency Control)★Oil pump motor power:0.25Kw 10,DMT-120paper sheet delivery and side conveyor,Structural features: ★Adopted on the 16th channel welded.Electric adjustment of cardboard the size of the lateral output pneumatic control board, electrically adjustable conveyor speed.★Cardboard sheets to the desired number or height requirements will be controlled by a foot switch out of cardboard.★Vertical bin using wide flat belt conveyor transport.,Technical parameter:★The maximum accumulation length:3000mm ★The maximum stack height:200mm ,Powered motor parameters:★Main conveyor motor:3Kw adopt frequency motor ★Lateral output of the motor:1.5Kw Three-phase asynchronous motor★Walking Motor:1.5Kw Three-phase asynchronous motor11,ZJZ glue station system ,Structural features: ★Provide the starch adhesive to the corrugated single facer ,two glue machine and some other gluing equipment.★Horizontal glue machine can meanwhile matched with main body glue and carrier glue, and mixing, glue large.★Making room storage barrels adhesive solution was to use the glue pump rubber equipment storage barrels, adhesive solution for equipment.★Storage barrels, plastic barrels with mixing device, avoid glue solution precipitation agglomerate.★System unit with carrier vessel, main tank, storage tank, and send the glue pump, the back glue pump, etc.★Glue system adopt glue cycle,rest glue go back to the glue square cylinder,Liquid level float automatic control,the back glue a bucket of glue liquid being beaten back with glue equipment storage bucket,cycle for glue,Save the glue solution,prevent the glue solution in the rubber plate pasting and caking precipitation.★Work has been completed, the residual gum dividend total pipeline with rubber equipment rubber pumped back rubber room storage barrels, for next time use.★Responsible for technical guidance, teaching adhesive dispensing process.,Technical parameter:★Horizontal body glue mixer:one ★Carrier glue mixer:one ★Storage glue mixer:one ★Plastic buckets on double coater:one ★Two coating machine back plastic buckets :one ★Plastic buckets on single machine :two ★Single machine back plastic buckets:two ★Lose glue dispensing pumps:four ,Glue barrel diameter parameters:★Horizontal body glue mixer:1250mm×1000mm×900mm★Carrier glue mixer diameter: ¢800mm×900mm★Diameter plastic bucket on Double Glue:¢800mm×1000mm ★Plastic buckets on single machine:¢800mm×1000mm★Storage tank diameter:¢1200mm×1200mm,Powered motor parameters:★Horizontal body glue mixer:3Kw ★Carrier glue mixer:2.2Kw(Ordinary three-phase) ★Output plastic pump motor :2.2Kw(Ordinary three-phase) ★Storage Tank Motor:1.5Kw(Ordinary three-phase) 12,ZQ steam system,Structural features: ★Production line for hot heating energy delivery device to maintain a stable operating temperature.★All units are designed to be independent small unit for the steam system, segmented temperature control, energy saving, easy to adjust.★By adjusting the steam pressure monitor dial to exercise control over the operating temperature, and a pressure.★Each group has a hydrophobic unit emptying bypass, when rapid shutdown cooling equipment.★Float trap 1/2 metal hose and connect the bypass valve, plug valve injection.★Between the piping system and the rotary heating member in order to achieve a flexible metal hose connection, to extend the service life of the rotary joint.★All steam pipes are made of seamless steel tubes, to ensure safety for use under normal pressure.,Technical parameter:★Steam consumption: about 2.5-3T/h ★Equipped with boiler:4t/h ★Equipped with boiler pressure:1.25MPa Pipe temperature:170-200ºC
Address:
Development Zone, East of Dongguang County, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
HRB-PACK GROUP Co., Ltd.
Since 1999. Located in the south of Beijing and north of Jinan, 3 factories in China for Corrugated cardboard production line, Flexo printer slotter die cutter machine, Flute laminator machine. We have independent export and import company, can export to clients directly.
We have more than 30, 000 sqm production plant, and 3, 000 sqm office building. More than 400 staffs, include sales team, after sales teams, production team, scientific research team...
We have after-sale office in China, Vietnam, India, Bangladesh, Italy…
With a large quantity of models and complete specifications, our products can meet the demand of different clients. With the spirit of keeping improving, we pursue perfection constantly. Our company actively carries out the overall quality managing work. Because of the beautiful and tasteful appearance, compact and careful technology, reasonable price and perfect after-sale service, our products have won the trust and praise from clients all over the country for many years.
Regarding vigorously developing the carton industry in China as our task, we′ll sincerely cooperate with clients and meet their demands with better quality products and perfect after-sale services.
